Single End Tinning Machine HY-028T

1. Action of cutting cable, peeling, tin dipping and etc. will be matched and adjusted automatically.

2. The wire range is produced from AWG#12 to 28, it is extremely versatile.

3. It has function of twisting.

4. Ultra short cable: the middle gum is 11mm.

5. The tin dipping angle of this machine is close to 90 degrees point dip which make the wire diameter tin dip range on average.

6. Use the way of digital control to adjust the point dip depth more accurate.

7. Suitable for horizontal and vertical OTP mould.    

Technical parameters

Type: HY-028T

Size: W1000xD700xH1550mm

Weight: 460 KG

Electric source: AC 220V 50/60Hz single phase

Function: wire cutting, single-end peeling, double-end peeling, single-end crimping, single-end twisting and single-end tin dipping

Capacity: 3500-3800pcs/hour (length is among 100-600mm)

Processing cable range: thin cable (AWG#32-38), standard cable (AWG#30-22), thick cable (AWG#26-12)

Cutting length: ultra short cable 15mm, common length 30-9999mm

Cutting accuracy: variation range: 1mm+cutting lengthx0.2% below

Peeling length: 1-9mm

Air pressure: 5-6kgf (need to use clean&dry air)

Detection device: with or without cable, with or without terminal, cable knotting, bad stripping (can be equipped), air pressure testing

Crimping capacity: 2.0 Ton